The rise and drop in temperatures in the coming years, place intense pressures on consumers around the world as this means only one thing, more energy and fuel are needed to control the environment and make homes more comfortable.
Over the years, new technology has been invented to improve the manner of living – energy saving devices are not excluded. However new technology, as always, is a bit expensive at first. And the prices will go down after some time. But instead of waiting for a more affordable energy saving devices, let us apply our common sense today and do some effort in saving energy.
•Avoid “phantom” energy users.
Electrical appliances that are plugged in to sockets even when not in use consume energy. It is like a turning on the engine of your car and idling for a very long time. A single appliance that remains plugged in may not give a significant increase in your electric bill but letting every appliance on “standby” can be a real money spender. Make sure to pull the plugs of every appliance from their sockets whenever you don’t use them.
•Turn down temperature of water heaters.
Water heaters hold about 40 gallons of water and maintain it at a constant temperature. Forty gallons of water that is sitting in your tank for a very long time consumes a lot of energy. If the water heater is not expected to be used for a while, it is advisable to maintain it at a lower temperature.
•The openings and leaks in doors and windows create drafts.
The stronger the draft is, the longer it will take for homes to be heated or cooled – in addition to the extra work that a heater or an air-conditioning system is doing to regulate the right temperature of the house. In newer homes, the problems may be few as today’s’ builders take more attention to sealing drafts potential areas and slots. Older homes may not be as well sealed. Even if the outer walls are insulated, air leaks often occur around wall outlets, switches and vents that could result in water condensation around these areas. A good foam patch could fix the problem.
•If there is really nothing to prepare much cooking for, let the stove and oven rest.
Instead, use the microwave. When cooking in stoves though, the closer the bottom of the pan used for cooking matches the hob ring of the stove, the more energy is saved. Too much flame for the pan and you are paying for heating the air around it.
•CFL lights are energy savers.
Using CFL bulbs will save you more than sixty percent of the cost of lighting compared with using incandescent light bulbs. Sure CFL lamps are a little more expensive but these are recovered easily because of its longer life and the energy saving feature it has.
•Clean appliances regularly.
Dirt and dust interferes with the efficiency of appliances. Likewise, place a good distance; allow about four inches of distance between the wall and appliances that generate heat for your walls not to retain the heat.
•When in the market always look for the energy coefficient and the energy saving features of the appliance you are buying.